Druid 28LCD LCD display In The Druid Range

Druid 28LCD

  • Two 3.7 Joule independently monitored and controlled zones
  • The robust and flexible design is ideal for commercial, industrial
    and high-security sites
  • Each zone can be set independently to be on/off or in high/low
    voltage modes
  • Can be programmed into alarm sensor mode allowing it to be
    integrated into a separate burglar alarm system
  • Four zones can easily be created by linking two Druid 25LCD
    energizers together using the Druid four-zone keypad
  • Built-in alarm monitors tampering or faults on the high voltage and
    earth fence wires
  • Connectable to armed response radio or GSM module
  • Lightning and power surge protection
  • Intelligent power saving to extend battery life
  • Built-in gate alarm input to monitor if the gate is open or closed
  • Optional keypad for controlling and programming the energizer. This
    allows the user to control the energizer remotely, with up to two keypads
  • The relay expansion card can be used to increase the number of
    information outputs from the energizer
  • Walk test mode for easy fence testing
  • The LCD background colour changes to easily identify the fence
    condition

Category:

Description

Specification
General
Enclosure size L400mm x W270mm x D125mm
Weight excluding battery (7AH) 5.7kg
Weight including battery (7AH) 8.0kg
IP rating IPx4
Operating temperatures -10°C to 50°C
Operating humidity
< 80% non-condensing
Electrical supply voltage 240V
Typical power consumption (normal operating conditions) 18VA
Internal battery 7AH Standby time (fully charged battery) 24hrs
High-voltage output Energy (500 Ohms load) 3.7 Joule per zone
Open circuit voltage 9 000V